 |
Inconel 600 Alloy Steel Tubes And Pipe Round UNS NO6600
Product Details:
| Place of Origin: | Jiangsu, China |
| Brand Name: | JIANGSU ZHIJIA STEEL |
| Model Number: | M290-50A, M350-50A |
Payment & Shipping Terms:
| Minimum Order Quantity: | Negotiation |
|---|---|
| Price: | Negotiation |
| Packaging Details: | Industry seaworthy wooden package or as customer's requirements |
| Supply Ability: | 5000 Ton/Tons per Month |
|
Detail Information |
|||
| Type: | Low Price High Quality ASTM B444 UNS N06625 Inconel 625 DIN2.4856 Alloy 625 Steel Pipe Tube SupplierHot Sale Products | Series: | Monel/Inconel/Incoloy/Hastelloy/Stainless Steel |
|---|---|---|---|
| Technique: | Hot Rolled, Hot Forged, Cold Drawn | Shape: | Sheet,Pipe,Bar,Coil,Strip |
| Standard: | ASTM AISI JIS DIN GB | SURFACE: | Anodized,Brushed,Mill Finished,Polished |
| Edge: | Mill Edge Slit Edge | Grade: | Hastelloy |
| Advantage: | Strong Corrosion-proof | Colour: | Bright,shinny |
| Usage: | Ship Building | ||
| High Light: | alloy steel round pipe,alloy steel pipe and tube,alloy steel pipe and tube UNS NO6600 |
||
Product Description
Introduce
Inconel alloy is an Alloy-chromium alloy that combines corrosion resistance with high strength and good
fabricability. It has high creep-rupture strength at temperatures up to 700 ℃. Its excellent relaxation resistance contributes to its application in springs.
Application
The alloy is used in jet engine and high-speed airframe parts such as wheels, buckets and spacers, and high-temperature bolts and fasteners. Inconel alloy is also used in the oil and gas drilling and production industries due to its high strength and resistance to chlorides, stress corrosion and sulfide stress cracking. Within these industries the alloy has been used for valves, pump shafts and wellhead components.
Standards
Sheet, Coil and Plate: UNS N07718, AMS 5596, ASTM B 670, ASME SB 670, B50TF14,
Round Bar: UNS N07718, AMS 5662, ASTM B 637, B50TF15, B50809D (Power Generation)
other:AMS 5662, AMS 5663, AMS 5832, AMS 5962, ASTM B637, GE B14H89, ISO 15156-3, (NACE MR 0175)
Key Features
Good creep rupture strength at high temperatures
Higher strength
Better mechanical properties at lower temperatures
Age hardenable High temperature dynamic applications
Inconel alloy is an Alloy-chromium alloy that combines corrosion resistance with high strength and good
fabricability. It has high creep-rupture strength at temperatures up to 700 ℃. Its excellent relaxation resistance contributes to its application in springs.
Application
The alloy is used in jet engine and high-speed airframe parts such as wheels, buckets and spacers, and high-temperature bolts and fasteners. Inconel alloy is also used in the oil and gas drilling and production industries due to its high strength and resistance to chlorides, stress corrosion and sulfide stress cracking. Within these industries the alloy has been used for valves, pump shafts and wellhead components.
Standards
Sheet, Coil and Plate: UNS N07718, AMS 5596, ASTM B 670, ASME SB 670, B50TF14,
Round Bar: UNS N07718, AMS 5662, ASTM B 637, B50TF15, B50809D (Power Generation)
other:AMS 5662, AMS 5663, AMS 5832, AMS 5962, ASTM B637, GE B14H89, ISO 15156-3, (NACE MR 0175)
Key Features
Good creep rupture strength at high temperatures
Higher strength
Better mechanical properties at lower temperatures
Age hardenable High temperature dynamic applications
|
Grade
|
C
|
Si
|
Mn
|
P
|
S
|
Cr
|
Ni
|
Al
|
Ti
|
|
Inconel 600
|
0-0.15
|
0-0.50
|
0-1.0
|
0-0.030
|
0-0.015
|
14.0-17.0
|
72 min
|
/
|
/
|
|
Inconel 601
|
0-0.10
|
0-0.50
|
0-1.5
|
0-0.020
|
0-0.015
|
21-25
|
58-63
|
1-1.7
|
/
|
|
Inconel 625
|
0-0.10
|
0-0.50
|
0-0.5
|
0-0.015
|
0-0.015
|
20.0-23.0
|
Balance
|
0-0.4
|
0-0.4
|
|
Inconel 718
|
0-0.08
|
0-0.35
|
0-0.35
|
/
|
0-0.010
|
17.0-21.0
|
50-55
|
0.2-0.8
|
0.7-1.15
|
|
Inconel X750
|
0-0.08
|
0-0.5
|
0-1.0
|
/
|
0-0.010
|
14.0-17.0
|
70 min
|
0.4-1.0
|
2.25-2.75
|
|
Inconel 825
|
0-0.05
|
0-0.5
|
0-1.0
|
/
|
0-0.03
|
19-23.5
|
38-46
|
0-0.2
|
0.6-1.2
|
|
Product Category
|
Size
|
Surface condition
|
|
Forged Bar
|
Dia 80-350
|
Black,No.1
|
|
Rolled Bar(Round,Flat)
|
Dia8-80,Flat 4-50*60-300
|
Balck, Peeled, Bright, No.1,
|
|
Cold drawn Bar(Round Flat,Hex)
|
Dia 2-60
|
Bright
|
|
Wire
|
Dia 0.25-20
|
Bright
|
|
Sheet
|
1-25*600-1200*length
|
Black, Bright, No.1, 2B, BA
|
|
Strip
|
0.05-3*20-250
|
Bright
|
Heat Treatments
Heat treatments may be adjusted to give required properties. For the best combination of tensile and stress rupture properties, the following quite complex cycle is recommended :
1 hr at 1750/1800ºF (955/980ºC) and air cool, then 8 hrs at 1325ºF (720ºC) and cool at 100ºF/hr (56ºC/hr) to 1150ºF (620ºC), hold for 8 hrs and air cool.
For the best room temperature and cryogenic tensile properties, the cycle is :
1-2hrs at 1950ºF (1065ºC) and air cool, then 8 hrs at 1325ºF (720ºC) and cool at 100ºF/hr (56ºC/hr) to 1150ºF (620ºC), hold for 8 hrs and air cool.
Hot Forming
Because of its strength, INCONEL alloy is more resistant than most materials to deformation during hot forming. It is readily hot-worked if sufficiently powerful equipment is used. Hot forming is performed in the 1650°-2050°F temperature range. In the last operation, the metal should be worked uniformly with a gradually decreasing temperature, finishing with some light reduction in the 1650°-1750°F range. This procedure is necessary to ensure notch ductility in stress-rupture applications when material has been annealed and aged.
Cold Forming
INCONEL alloy can be cold-formed by standard procedures used for steel and stainless steel.
Machining
INCONEL alloycan be readily machined, but its high strength and work-hardening characteristics must be considered in the selection and use of proper tool materials and design, operating speeds, and coolants. When machined in the age-hardened condition the alloy will have a slightly better finish; chip action on chipbreaker tools will be better. The use of annealed material, however, provides easier machining and longer tool life.
Super-Plastic Forming
This alloy, designated INCONEL alloy , is available as annealed sheet in thicknesses from 0.02 to 0.08 inches (0.5 to 2.0
mm) in widths up to 36 inches (914 mm). The specification SAE AMS 5950 was developed to define the requirements for the alloy.
Heat treatments may be adjusted to give required properties. For the best combination of tensile and stress rupture properties, the following quite complex cycle is recommended :
1 hr at 1750/1800ºF (955/980ºC) and air cool, then 8 hrs at 1325ºF (720ºC) and cool at 100ºF/hr (56ºC/hr) to 1150ºF (620ºC), hold for 8 hrs and air cool.
For the best room temperature and cryogenic tensile properties, the cycle is :
1-2hrs at 1950ºF (1065ºC) and air cool, then 8 hrs at 1325ºF (720ºC) and cool at 100ºF/hr (56ºC/hr) to 1150ºF (620ºC), hold for 8 hrs and air cool.
Hot Forming
Because of its strength, INCONEL alloy is more resistant than most materials to deformation during hot forming. It is readily hot-worked if sufficiently powerful equipment is used. Hot forming is performed in the 1650°-2050°F temperature range. In the last operation, the metal should be worked uniformly with a gradually decreasing temperature, finishing with some light reduction in the 1650°-1750°F range. This procedure is necessary to ensure notch ductility in stress-rupture applications when material has been annealed and aged.
Cold Forming
INCONEL alloy can be cold-formed by standard procedures used for steel and stainless steel.
Machining
INCONEL alloycan be readily machined, but its high strength and work-hardening characteristics must be considered in the selection and use of proper tool materials and design, operating speeds, and coolants. When machined in the age-hardened condition the alloy will have a slightly better finish; chip action on chipbreaker tools will be better. The use of annealed material, however, provides easier machining and longer tool life.
Super-Plastic Forming
This alloy, designated INCONEL alloy , is available as annealed sheet in thicknesses from 0.02 to 0.08 inches (0.5 to 2.0
mm) in widths up to 36 inches (914 mm). The specification SAE AMS 5950 was developed to define the requirements for the alloy.
About us
JIANGSU ZHIJIA STEEL INDUSTRIES CO., LTD
is a leading professional comprehensive steel company with collection of producing, processing, distributing and trading.
JIANGSU ZHIJIA Group Company is one of the biggest carbon steel and stainless steel products exporter in China.One-step shop of stainless steel sheet, stainless steel pipe, stainless steel coil, stainless steel profiles, carbon steel and galvanized products meet all of your requirements.
With more than 15 years export experience in supplying a great variety of customers from different fields. Such as United States, Europe, Middle East, Southeast Asia, Africa, South America market. Our annual export volume is more than 500,000 tons.
Our produst catalogue
Stainless Steel Round Tube
Stainless Steel Plate Sheet
Stainless Steel Coil
SS Square Tube
Seamless Stainless Steel Pipe
Stainless Steel Strip
Steel Wire Rod
Stainless Steel Bar Rod
Alloy Steel Strip
Alloy Steel Tubes
Alloy Steel Coil
Galvanized Steel Coil
Galvanized Steel Plate
Galvanized Steel Tube
PPGI Steel Coil
Carbon Steel Coil
Want to Know more details about this product