Payment & Shipping Terms:
|Technical Standard:||ASTM A213||Production:||COLD DRAWN|
|Stainless Grade:||TP304, TP304L||Surface:||ANNEALED AND PICKLED|
Stress Relieved U Bend Pipe ASTM A213 TP304 Industrial Heat Exchanger Tubes OD 5/8'' X 0.065''
OD 9.5mm - 38.1mm
WT up to 6.35mm
Bending radii 1.25 x OD up to 1700mm
Bends can be supplied in accordance with TEMA R / ASTM SA/A556
Leg length up to 15000mm
Heat treatment where required by electric furnance or direct resistance
Hydrotesting up to 10,000 psi
Dye penetrant of 'U' bend area
We are equipped to carry out heat treatment of bends plus a minimum 150mm of leg.
Heat treatment equipment is computer controlled with the added facility of data recording.
An argon protective atmopshere is used inside stainless and special alloy tubes during heat treatment.
We can provide all types of annealing; solution annealing and stress relieving.
Measuring, Cutting, Deburring and Cleaning
'U' bends are produced, controlled and measured fully in accordance with relevant standards.
All tubes are cut to the specified leg lenghts, ends deburred and the bores are internally cleaned with dried air.
For roadfreight in timber fingers or skids.
In strong open or closed wooden boxes depending destination.
Each bundle is protected with plastic sheets.
Customers can provide their own packing or Spezilla can prepare a packing plan.
Detailed packings lists are attached to wooden cases to give quick and clear identification of contents.
|ASTM A 213 TubingASME SA 213 Tubing||Seamless Ferritic Stainless Steel and Austenitic Stainless Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes.||Pressure tubes, made from 16 grades of austenitic stainless steel and from 12 grades of ferritic Cr-Mo Alloy Steel.|
|ASTM A 249 TubingASME SA 249 Tubing||Welded Austenitic Stainless Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes.||Pressure tubes, made from austenitic stainless steels, (Types 304, 304H, 304L, 305, 309, 310, 316, 316H, 316L, 317, 321, 321H, 347, 347H, 348, 348H, and XM grades.)|
|ASTM A 268 TubingASME SA 268 Tubing||Seamless and Welded Ferritic Stainless Steel Tubing for General Service.||15 grades of ferritic stainless steel tubing for general corrosion resistance and high temperature service. (Types 329, 405, 409, 410, 429, 430, 430Ti, 443, 446, XMs & others).|
|ASTM A 269 Tubing||Seamless and Welded Austenitic Stainless Steel Tubing for General Service.||13 grades of austenitic stainless steel tubing for general corrosion-resisting and high-temperature service. (Types 304, 304L, 316, 316L, 317, 321, 347, 348 and XM grades).|
|ASTM A 270 Tubing||Seamless and Welded Austenitic Stainless Steel Sanitary Tubing.||Austenitic stainless steel tubing intended for use in the diary and food industry in sizes up to and including 4 in. in outside diameter.|
|ASTM A 312 TubingASME SA 312 Tubing||Seamless and Welded Austenitic Stainless Steel Pipe.||Austenitic stainless steel pipe intended for high temperature and general corrosive service. 22 grades are covered.|
|ASTM A 358 TubingASME SA 358 Tubing||Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service.||For corrosion and high temperature service, normally not less than 8 in. nominal diameter. Types 304, 316, 309, 310, 321, 347, 304L, 316L, 304H, 316H.|
|ASTM A 376 TubingASME SA 376 Tubing||Seamless Austenitic Stainless Steel Pipe for High-Temp Central-Station Service.||Austenitic stainless steel pipe intended for high temperature and general corrosive service. Better surface than A312 pipe.|
|ASTM A 409 TubingASME SA 409 Tubing||Welded Large Outside Diameter Light Wall Austenitic Chromium-Nickel Alloy Steel Pipe for Corrosive or High Temperature Service.||Nominal diameter 14-30 in. in Schedules 5S and l0S. Types 304, 309, 310, 316, 317, 321, 347, 348, 304L, 316L.|
|ASTM A 450 TubingASME SA 450 Tubing||General requirements for Alloy Steel Tubes.||Common requirements for ASTM tubular specifications.|
|ASTM A 511 Tubing||Seamless Stainless Steel Mechanical Tubing.||27 grades are covered for mechanical applications. Primarily round tubing.|
|ASTM A 530 TubingASME SA 530 Tubing||General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Pipe.||Common requirements for ASTM pipe specifications as listed.|
|ASTM A 554 Tubing||Welded Stainless Steel Mechanical Tubing.||Nineteen grades are covered for mechanical applications. Rounds, squares, rectangles, and special shapes are included.|
|ASTM A 632 Tubing||Seamless and Welded Austenitic Stainless Steel Tubing for General Service. Small Diameter.||9 grades of austenitic stainless steel tubing for general corrosion-resisting and high-temperature service.|