Payment & Shipping Terms:
|Material:||AISI 316L Stainless Steel||Type:||Diaphragm Valve Tank Bottom|
|Connection Type:||Tri Clamped||Size:||1/4'' - 4''|
|Specificartion:||3A ASME BPE||MOQ.:||1PC|
1/2'' to 4'' Stainless Steel AISI 316L Aseptic Tri Clamp Tank Bottom Sanitary Valve
Sanitary diaphragm valve are made from stainless steel SS316, and come with double gaskets: EPDM and PTFE. The sanitary design allows precise control of the fluid flow rate with low turbulence and minimal back pressure.Tank bottom valve, with its conical profile allows for complete drainability and the prevention of deadlegs or entrapment areas. These valves are installed by either bolting or welding to the tank surface. Our tank bottom valves are available in sizes ranging from 1/4” through 4”, are manufactured using type SA-479 316L stainless steel and are available with a wide variety of drain ports and end connections. Positive closure can be achieved by means of manual or pneumatic actuation.
Spezilla offers many surface finish option to meet your specifications. In addition, heat number are etched into the body providing full traceability with mill test summaries provided.
45° outlet – standard
1/2"–4" (DN 15–100)
316L Stainless Steel Bar Stock ASME SA-479
(UNS S31603), 1/2"–4" (DN 15–100)
The tank interface surface is designed for a weld attachment. However, ANSI flanges can be ordered upon special request.
Drain Port End Connections:
Standard outlet port is on a 30° angle. 45° angle is available upon special request.
• 14, 16 Gauge O.D. Tubing, dependent on size.
• Schedule 5, 10, and 40 Pipe
• Tri-Clover Tri-Clamp
|Steel Material||Product wetted steel parts||AISI 316L||Provided with material inspection report|
|Other steel parts||AISI 304|
|Seal Material||Standard||EPDM+PTFE||All seal materials comply with FDA 21CFR177.2600|
|Option||EPDM, FPM, Silicone,|
|Pressure||Working Pressure||0-145psi (0-10bar)|
|Supply pressure for air actuator||Min.- Max.: 5~8bar (70-116 PSI)|
|Temperature||Working temperature||-4° F to 302° F (-20°C to 150°C)|
|Surface Treatment||Inside surface treatment||Ra 16-32 µ in (0.4-0.8 µm)|
|Outside surface treatment||Sand blast or mirror|
|Connection||End connections: Sanitary Clamp, Flanged, or others upon request|
|Drive Model:||Manual type plastic turning knob|
|Size:||DN25 ~ 50 or other size on request|
|Steel Material:||316L, hygienic design|
|Diaphragm Material:||EPDM or EPDM + PTFE|
|Max. Working Pressure:||6 ~ 10 bar|
|Working Temperature:||90 ºC ~ 150ºC|
|Connection End||Tri Clamp|
|Surface Treatment:||Rg 0.4 ~ 0.6µm or electrolysis process|
|Clamp Standards:||SMS 3017, DIN 11864, DIN 11853, DIN32676, BS 4825, ISO 2852|
|Application:||Pharmaceutical, WFI, Fine Chemical industries|