Safety Hygienic Stainless Steel Sanitary Valves With 580 Psi Maximum Pressure

Stainless Steel Hygienic Valves Butterfly Valve with Pull Handle Weld End

SPEZILLA manufactures custom sanitary and hygienic valves for applications used in the Food, Beverage and Pharmaceutical industries. All components are subjected to a stringent control procedures to ensure that they are FDA approved for use in Federally Inspected Meat and Poultry Plants.

The Type hygienic angle control valve is designed for the strict sanitary requirements of the food, beverage, and pharmaceutical industries such as FDA, 3A, and EHEDG. The valve body is designed free of dead space and having a smooth, polished, satin, or mirror finish on internal and external surfaces. PTFE bushings are used to seal body and bonnet as well as bonnet and plug stem. An additional steam line connection is available for stricter purity requirements. This design can be cleaned using the CIP method.

Size: 1/4" to 5"

Maximum Pressure: 580 psi

Std. Materials: Cast & Forged Stainless Steel

Temperature Range: 32 to 300^oF (0 to 150^oC)

Application

Technical Specification

• End connection: threaded, clamp, welded as customers require.
• Size available: 1/4", 3/8", 1/2", 3/4"
• Max. working pressure: 147psi (10bar)
• Min. working pressure: vacuum
• Working temperature: 14 ~ 248°F (-10 ~ 120°C), EPDM

Temperature:

Max. sterilization temperature: 130°C, dry steam: 121°C (2bar).
Steam must be dry, because condensed water will damage the diaphragm. The diaphragm should be replaced after 100 times samplings or sterilizations.

Sample Valves and Equipment,offers a wide array of sanitary sample valves for many applications including beverage, semiconductor and biopharmaceutical water systems. Our stainless steel sampling valves allow the user to easily extract a sanitary sample of a liquid for analysis.

Sanitary Solutions is your source for a T304 Sanitary Sample Valve primarily found in the Beverage, Brewery, Pharmaceutical, Tank and Winery Industries. Our TP304 Sanitary Sample Valve is clamp end with either a 3/8" or 1/2" spout depending on the size needed. As for the surface finish of the valve, our valve is polished to meet sanitary standards.

Sanitary sample valve is a type of valve used in process industries that allows taking a representative portion of a fluid (gases, liquids, fluidized, solids, or slurries) to test (e.g. by physical measurements, chemical analysis, microbiological examination), typically for the purposes of identification, quality control, or regulatory assessment. It is a valve used for sampling.

Sanitary Solutions is your source for a T304 Sanitary Sample Valve primarily found in the Beverage, Brewery, Pharmaceutical, Tank and Winery Industries. Our TP304 Sanitary Sample Valve is clamp end with either a 3/8" or 1/2" spout depending on the size needed. As for the surface finish of the valve, our valve is polished to meet sanitary standards.

Strength:

• Material of stainless steel 316L and 1.4404 is from reputed mill to guarantee the chemical composition and mechanical properties. Material certificate will be submitted follow to orders.
• Forged valve body and disc to control the leakage and visual.
• Superior facilities and good experiences for fabrication.
• In ability to improve and develop new design.
• Fast delivery is possible to meet your needs well in time.
• Low cost from bulk production will reduce your budget and improve your business.
• Small quantity available.

Quality & Inspection:

• PMI test to verify material grade
• Dimension controlling during fabricating and finished
• Visual and surface 100% examination before shipment
• Packed in carton box firstly, then in wooden case
• Third party inspection available.