 |
2205 904l Stainless Steel Plate Sheet A-213-TP304 Hairline Cr 321 316l
Product Details:
| Place of Origin: | Jiangsu, China |
| Brand Name: | JIANGSU ZHIJIA STEEL |
| Model Number: | Tisco - 01 |
Payment & Shipping Terms:
| Minimum Order Quantity: | Negotiation |
|---|---|
| Price: | Negotiation |
| Packaging Details: | Waterproof Paper+Metal Band Strapping+Protective Steel Ring+Fumigation Wooden Frame |
| Supply Ability: | 2000 Ton/Tons per Month |
|
Detail Information |
|||
| Delivery Time: | 7-15 Days | Type: | 2205 904l Stainless Steel Metal Plates Sheet A-213-TP304 Hairline Cr 321 316l |
|---|---|---|---|
| Application: | Decoration And Fabrication | Grade: | 300 Series |
| Standard: | JIS ASTM AISI EN DIN GB | Length: | 2000/2438/2500/3000/3048 Mm |
| Thickness: | 0.1-3mm, 3-100mm | Width: | 1000/1219/1250/1500 Mm |
| Tolerance: | ±3% | Processing Service: | Bending, Welding, Decoiling, Punching, Cutting |
| Steel Grade: | 316L, 304 | Surface Finish: | 2B |
| Product Name: | 304 Stainless Steel Sheet | Surface: | BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D |
| Edge: | Mill Edge &Slit Edge | Packing: | PVC+waterproof Paper+wooden Case |
| Technique: | Cold Rolled Hot Rolled | Sample: | Freely |
| Port: | Shanghai | ||
| High Light: | stainless steel 904l sheets 0.5x100,2205 stainless steel plate,stainless steel sheet and plate |
||
Product Description
2205 904l Stainless Steel Metal Plates Sheet A-213-TP304 Hairline Cr 321 316l
201 Stainless Steel
Copper content: J4>J1>J3>J2>J5.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1(Mid Copper): The carbon content is slightly higher than J4 and the copper content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing products, such as decorative board, sanitary products, sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the curved tube (90°) is prone to bursting.
In terms of flat plate: due to the high hardness, the board surface is beautiful, and the surface treatment such as frosting,
polishing and plating is acceptable. But the biggest problem is the bending problem, the bend is easy to break, and the groove is easy to burst. Poor extensibility.
J3(Low Copper): Suitable for decorative tubes. Simple processing can be done on the decorative panel, but it is not possible with a little difficulty. There is feedback that the shearing plate is bent, and there is an inner seam after breaking (black titanium,color plate series, sanding plate, broken, folded out with inner seam). The sink material has been tried to bend, 90 degrees, but it will not continue.
J4( High Copper): It is the higher end of the J series. It is suitable for small angle types of deep drawing products. Most of the products that require deep salt picking and salt spray test will choose it. For example, sinks, kitchen utensils, bathroom products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel
304 is a versatile stainless steel that is widely used to make equipment and parts that require good overall performance
(corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, steel must
contain more than 18% chromium and more than 8% nickel.
316 stainless steel
316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance, and high-temperature strength due to the addition of Mo, which can be used under harsh conditions; excellent work hardening (non-magnetic).
Equipment for seawater use,chemical, dye, papermaking, oxalic acid, fertilizer and other production equipment; photographs, food industry, facilities incoastal areas, ropes, CD rods, bolts, nuts.
430 stainless steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable ferritic stainless steel available. Type 430 is known for good corrosion, heat, oxidation resistance, and its decorative nature.It is important to note that when well polished or buffed its corrosion resistance increases. All welding must occur at higher temperatures, but it is easily machined, bent, and formed.
Thanks to this combination it is used in a number of different commercial and industrial applications including:Furnace combustion chambers,Automotive trim and molding,Gutters and downspouts,Nitric acid plant equipment,Oil and Gas refinery equipment,Restaurant equipment,Dishwasher linings,Element supports and fasteners.etc.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1(Mid Copper): The carbon content is slightly higher than J4 and the copper content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing products, such as decorative board, sanitary products, sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the curved tube (90°) is prone to bursting.
In terms of flat plate: due to the high hardness, the board surface is beautiful, and the surface treatment such as frosting,
polishing and plating is acceptable. But the biggest problem is the bending problem, the bend is easy to break, and the groove is easy to burst. Poor extensibility.
J3(Low Copper): Suitable for decorative tubes. Simple processing can be done on the decorative panel, but it is not possible with a little difficulty. There is feedback that the shearing plate is bent, and there is an inner seam after breaking (black titanium,color plate series, sanding plate, broken, folded out with inner seam). The sink material has been tried to bend, 90 degrees, but it will not continue.
J4( High Copper): It is the higher end of the J series. It is suitable for small angle types of deep drawing products. Most of the products that require deep salt picking and salt spray test will choose it. For example, sinks, kitchen utensils, bathroom products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel
304 is a versatile stainless steel that is widely used to make equipment and parts that require good overall performance
(corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, steel must
contain more than 18% chromium and more than 8% nickel.
316 stainless steel
316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance, and high-temperature strength due to the addition of Mo, which can be used under harsh conditions; excellent work hardening (non-magnetic).
Equipment for seawater use,chemical, dye, papermaking, oxalic acid, fertilizer and other production equipment; photographs, food industry, facilities incoastal areas, ropes, CD rods, bolts, nuts.
430 stainless steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable ferritic stainless steel available. Type 430 is known for good corrosion, heat, oxidation resistance, and its decorative nature.It is important to note that when well polished or buffed its corrosion resistance increases. All welding must occur at higher temperatures, but it is easily machined, bent, and formed.
Thanks to this combination it is used in a number of different commercial and industrial applications including:Furnace combustion chambers,Automotive trim and molding,Gutters and downspouts,Nitric acid plant equipment,Oil and Gas refinery equipment,Restaurant equipment,Dishwasher linings,Element supports and fasteners.etc.
|
Product Name
|
Stainless steel plate/sheet
|
|||
|
Material
|
201/304/304L/321/316/316L/309/309S/310S/904Lect, Or Customized
|
|||
|
Thickness
|
1-3mm/3-20 mm/Customized
|
|||
|
Size
|
Length:100mm-12000mm (All Sizes Can be customzied)
Width:100-2000mm |
|||
|
Standard
|
ASTM, JIS, GB, AISI, DIN, BS,EN
|
|||
|
Certifications
|
RoHS
|
|||
|
Packing
|
Industry standard packaging or according to client's requirement
|
|||
|
Brand
|
TISCO,ZPSS,ESS,Baosteel,Shandong Iron and Steel, Rizhao Iron and Steel, Xiwang Special Steel etc .
|
|||
|
Payment terms
|
30%T/T in advance, the balance against the B/L copy
|
|||
|
Delivery time
|
Fast delievery in 7 days,up to order quantity
|
|||
|
MOQ
|
1Ton
|
|||
About us
JIANGSU ZHIJIA STEEL INDUSTRIES CO., LTD
is a leading professional comprehensive steel company with collection of producing, processing, distributing and trading.
JIANGSU ZHIJIA Group Company is one of the biggest carbon steel and stainless steel products exporter in China.One-step shop of stainless steel sheet, stainless steel pipe, stainless steel coil, stainless steel profiles, carbon steel and galvanized products meet all of your requirements.
With more than 15 years export experience in supplying a great variety of customers from different fields. Such as United States, Europe, Middle East, Southeast Asia, Africa, South America market. Our annual export volume is more than 500,000 tons.
Our produst catalogue
Stainless Steel Round Tube
Stainless Steel Plate Sheet
Stainless Steel Coil
SS Square Tube
Seamless Stainless Steel Pipe
Stainless Steel Strip
Steel Wire Rod
Stainless Steel Bar Rod
Alloy Steel Strip
Alloy Steel Tubes
Alloy Steel Coil
Galvanized Steel Coil
Galvanized Steel Plate
Galvanized Steel Tube
PPGI Steel Coil
Carbon Steel Coil
Want to Know more details about this product
