Payment & Shipping Terms:
|Product Name:||Equal Tee||Size:||25.4mm|
|Connection Type:||Butt Weld||Standard:||ASME BPE / 3A|
ASME BPE Stainless Steel AISI 316L Equal Tee Sanitary pipefittings
If you recently visited a commercial brewery, dairy or water plant, you may have noticed Shiny, Polished, Sanitary Tube with Tri Clover type, Sanitary Clamps and Connections. Sanitary Fittings and Clamps are used almost exclusively in Food, Beverage and Bio-Pharm processes. Sanitary Fittings are preferred for their Strength, Durability, Leak-Proof Design, Clean-Ability, etc. As a result of their smooth open bore and exposed surfaces, you can visually see every surface that your product comes in contact with is clean. Sanitary Fittings are made from all 304/304L or 316/316L stainless steel components.
|1 1/2"||1 1/2||1.65||2 3/4|
|2 1/2"||2-1/2||1.65||3 1/2|
|Material||T304, T316L, EN 1.4301, EN 1.4404 etc.|
|End Connection||Tri-Clamp, single tri-clamp etc|
|Surface||Descaled finish, Mirror polished|
|Gasket||PTFE, EPDM, Buna-N, Silicone etc.|
|Application||Food, Brewery, Beverage, Dairy, Pharmaceutical, Fine chemical, Cosmetic etc.|
|How to order||*Part Name*Dimension
BPE Fittings – Clamp Fittings – Straight Clamp Tee and Cross- Hygienic Clamp Joint Fittings
Fittings are visually inspected for surface finish imperfections as mentioned in table SF-3 in the ASME BPE 2005 specification. Additional percentages of every manufactured batch undergo a thorough dimensional evaluation with a 0% tolerance for failure. As a part of rigorous inspection standard, heat number traceability is verified for accuracy and chemical composition, per table DT-3, before the fittings are packaged for shipment.
• Wall Thickness
• Squareness of Face
• Off Angle
• Off Plane
The ends are capped to prevent damage and contamination. All fittings are packaged in bags. All bags are labeled with Spezilla Part Number, Heat Number(s), ASME-BPE, and the appropriate ASMEBPE Surface Finish Designation for reorder, traceability and tracking purposes.
Spezilla's stainless steel asme bpe sanitary fittings are applicable to a wide range of manufacturing industries:
2. Beverage processing
4. Pharmaceutical Production
5. Personal Care
1. Material Controlled & Machined Precisely.
2. Easily welded
3. Quickly fit up
4. High corrosion resistant
5. Long service life
6. Safety Stock System.
7. Well packaged
8. Fast delivered
9. Surface Finish: #180 Grit, #320 Grit
|C / Max.||0.035|
|Mn / Max||2.00|
|P / Max||0.045|
|S / Max||0.005 - 0.017|
|Si / Max||1.00|
|Ni||10.00 - 14.00|
|Cr||16.00 - 18.00|