Payment & Shipping Terms:
|Product Name:||90 Degree Elbows||Size:||1"|
|Thickness:||0.065'' 1.65mm||Stainless Type:||TP316L|
|Connection Type:||Butt Weld||Standard:||ASME BPE / 3A|
AISI316L ASME BPE Sanitary 90 degree Elbows connection Type clamp
BPE clamp Fittings
BPE clamp Fittings are tri-clamp connected tube fittings of ASME BPE fitting series, it is made from 316 welded tube and electropolishing or mechanically polished to get high purity surface. SPEZILLA sanitary is assuredly capable of supplying qualified hygienic BPE Fittings comply to your your condition and FDA,GMP requirement.
|Material||T304, T316L, EN 1.4301, EN 1.4404 etc.|
|End Connection||Tri-Clamp, single tri-clamp etc|
|Surface||Descaled finish, Mirror polished|
|Gasket||PTFE, EPDM, Buna-N, Silicone etc.|
|Application||Food, Brewery, Beverage, Dairy, Pharmaceutical, Fine chemical, Cosmetic etc.|
|How to order||*Part Name*Dimension
Fittings are visually inspected for surface finish imperfections as mentioned in table SF-3 in the ASME BPE 2005 specification. Additional percentages of every manufactured batch undergo a thorough dimensional evaluation with a 0% tolerance for failure. As a part of rigorous inspection standard, heat number traceability is verified for accuracy and chemical composition, per table DT-3, before the fittings are packaged for shipment.
• Wall Thickness
• Squareness of Face
• Off Angle
• Off Plane
The ends are capped to prevent damage and contamination. All fittings are packaged in bags. All bags are labeled with Spezilla Part Number, Heat Number(s), ASME-BPE, and the appropriate ASMEBPE Surface Finish Designation for reorder, traceability and tracking purposes.
Spezilla's stainless steel asme bpe sanitary fittings are applicable to a wide range of manufacturing industries:
2. Beverage processing
4. Pharmaceutical Production
5. Personal Care
1. Material Controlled & Machined Precisely.
2. Easily welded
3. Quickly fit up
4. High corrosion resistant
5. Long service life
6. Safety Stock System.
7. Well packaged
8. Fast delivered
9. Surface Finish: #180 Grit, #320 Grit
|C / Max.||0.035|
|Mn / Max||2.00|
|P / Max||0.045|
|S / Max||0.005 - 0.017|
|Si / Max||1.00|
|Ni||10.00 - 14.00|
|Cr||16.00 - 18.00|