Payment & Shipping Terms:
|Tube Shape:||U Bend Tube||Manufacturing:||Cold Drawn|
|Materials No.:||TP321/321H||OD:||1/2'' - 2''|
|WT:||0.035'' - 0.083''||Surface:||SOLUTION ANNEALED|
u bend tube,
stainless steel u bends
TP321/321H Stainless Steel U Bend Tube,U Tube Heat Exchanger SA213
Grade 321 is a common austenitic 18/8 stainless steel alloy, with the addition of titanium, making it a good choice in high temperature environments of up to 900° C. 321 stainless steel has good welding and forming capabilities and is widely used in operating temperature environments in excess of 500° C.
Stainless steel 321H, commonly referred as UNS S32109, is the higher carbon version of the 321 grade, to provide higher temperature strength.321/321H Pipes,Tubes and 321H pipe fittings are mainly used in manufacturing heat exchangers, pressure vessels, pharmaceutical and chemical processing equipments.
Standard Technical Range
We are equipped to carry out heat treatment of bends plus a minimum 150mm of leg.
Heat Treatment Equipment
|321||0.08 max.||2.00 max.||0.75 max.||0.045 max.||0.03 max.||17.0 – 19.0||9.0-12.0||5 x (C+N) min.||0.1|
|321H||0.04 – 0.10||2.00 max.||0.75 max.||0.045 max.||0.03 max.||17.0 – 19.0||9.0-12.0||5 x (C+N) min.||0.1|
|Tensile Strength (Mpa)||515|
|Yield Strength (Mpa)||205|
Stainless Steel Tube Standards:
ASTM A249: Standard specification for welded austenitic steel boiler,superheater, heat-exchanger and condenser tubes.
ASTM A269:Standard specification for welded austenitic stainless steel tubing for general service.
ASTM A688:Standard specification for welded austenitic stainless steel feedwater heater tubes.
ASTM A554:Standard specification for welded stainless steel mechanical tubing.
ASTM A268:Specification for seamless and welded Ferritic/Martensitic stainless steel tubing for General Service
ASTM A789:Specification for seamless and welded Ferritic/Austenitic stainless steel tubing for General Service
ASTM A312:Seamless/Welded austenitic stainless steel pipe
DIN17455:General purpose welded circular stainless steel tubes
DIN17457: Welded circular austenitic stainless steel tubes subject to special requirements; technical delivery conditions
EN 10217-7:Welded Steel Tubes for pressure purposes-Part 7 Stainless steel tubes
|Materials - U-Bent Tube|
|Carbon Steel||SA 179 / A 179|
|Carbon Steel||SA 210 / A 210|
|Carbon Steel||SA 334 / A 334|
|Stainless Steel||SA 213 / A 213|
|SA249 / A249|
|SA268 / A268|
|SA688 / A688|
|Duplex Stainless Steel||SA 789 / A 789|
|Copper & Cu Alloys||SB 111 / B 111|
|Titanium & Ti Alloys||SB 338 / B 338|
|For different materials please contact our sales department.|