Payment & Shipping Terms:
|Materials:||TP304 Stainless Steel||Type:||Sample Valves Sanitary|
|Connection Type:||Tri Clamp||Diameter:||1/2"-6"|
|Specifications:||3A ASME BPE||MOQ.:||1PC|
hygienic sample valves,
aseptic sampling valve
3A TP 304 Aseptic Sampling Valves Stainless Steel Sanitary Valve
Sample Valves and Equipment,offers a wide array of sanitary sample valves for many applications including beverage, semiconductor and biopharmaceutical water systems. Our stainless steel sampling valves allow the user to easily extract a sanitary sample of a liquid for analysis.
stainless steel aseptic sampling valves are used in the food, dairy, brewery, winery and many other hygienic industries.
Diaphragm: Silicone (for standard valve), EPDM (for valve with micro type connector)
Aseptic sampling valve is made from three parts: valve body, valve head and one piece of diaphragm. A rubber diaphragm valve is put at the axis of valve head, acting as an extensible valve core.
Sanitary sample valve is a type of valve used in process industries that allows taking a representative portion of a fluid (gases, liquids, fluidized, solids, or slurries) to test (e.g. by physical measurements, chemical analysis, microbiological examination), typically for the purposes of identification, quality control, or regulatory assessment. It is a valve used for sampling.
SPEZILLA Valves series Sample valves are used in piping systems or on tanks for sampling. It can also be assembled at the bottom of the tank or pipeline for residue drain.
Sanitary Solutions is your source for a T304 Sanitary Sample Valve primarily found in the Beverage, Brewery, Pharmaceutical, Tank and Winery Industries. Our TP304 Sanitary Sample Valve is clamp end with either a 3/8" or 1/2" spout depending on the size needed. As for the surface finish of the valve, our valve is polished to meet sanitary standards.
Max. product pressure: 87psi (6bar)
Max. sterilization temperature: 130°C, dry steam: 121°C (2bar).
Steam must be dry, because condensed water will damage the diaphragm. The diaphragm should be replaced after 100 times samplings or sterilizations.
Stainless Steel 304,316L or en.1.4301, 1.4404 forged.
Quality & Inspection:
|General Specifications of Sanitary Sampling Valve|
|Max. Pressure||0~6 bar (600Kpa)|
|Continuous Working Temperature||-10°C ~ +121°C(EPDM)|
|Sterilization Temperature||150°C (Max 20min)|
|Internal Surface Finish||R0.8m|
|External Surface Finish||R1.6m|
|Connection Standards||DIN, SMS, 3A, ISO|
|Connection Methods||Welding, Clamp, Threading|
|Product Wetted||304 (1.4301) or 316L (1.4404)|
|Other Steel Parts||304 (1.4301)|
|EN 10204 3.1B certificate is available on request.|
|Options||FPM, Silicone, NBR|
|All seal materials comply with FDA 177.2600.|