Payment & Shipping Terms:
|Type:||Welded||Manufacturing Spec.:||ASME SA249, ASTM A249|
|Production:||TIG WELDING||Surface Finish:||BRIGHT ANNEALED|
|NDT:||EDDY CURRENT||MTC:||EN10204 3.1|
heat exchanger tube,
stainless steel heat exchanger tubes
Bright Annealed Stainless Steel Tube ASTM A249 TP304 Tig Welding Stainless Tubing
Spezilla provides heat exchanger and condenser tubes with an outside diameter of 9.53 up to 50.8 mm. We deliver lengths up to 22 meters of both welded and seamless steel types, such as carbon alloy, nickel alloy, titanium, stainless steel and copper alloys.
ASTM A 249 / ASME SA 249
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
1.1 This specification covers nominal-wall-thickness welded tubes made from the austenitic steels listed in Table 1, with various grades intended for such use as boiler, superheater, heat exchanger, or condenser tubes.
1.2 Grades TP304H, TP309H, TP309HCb, TP310H, TO310HCb, TP316H, TP321H, TP347H, and TP348H are modifications of Grades TP304, TP309S, TP309Cb, TP310S, TP310Cb, TP316, TP321, TP347, and TP348, and are intended for high-temperature service such as for superheaters and reheaters.
1.3 The tubing sizes and thicknesses usually furnished to this specification are 1/8 in. [3.2 mm] in inside diameter to 5 in. [127 mm] in outside diameter and 0.015 to 0.320 in. [0.4 to 8.1 mm], inclusive, in wall thickness. Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification.
1.4 Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.4 mm] in thickness.
1.5 Optional supplementary requirements are provided and, when one or more of these are desired, each shall be so stated in the order.
1.6 The values stated in either inch-pound units or SI units are to be regarded separately as standard. (A combination of values from the two systems may result in nonconformance with the specification.) The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.
|TRADE NAME||WELDED ASME||SEAMLESS ASME|
|Carbon||SA-214, A-178A, C||SA-179, A-192|
|Carbon Alloys||SA-213, T5, T9, T11, T22|
|Low Temp Carbon||SA-334 1, 6||SA-334 1, 6|
|Seamless Medium Carbon||SA-210 A-1,C|
|Carbon Feedwater Heater||SA-557 A2, B2, C2||SA-556 A2, B2, C2|
|Austenitic Stainless||SA-249 TP 304, 304L, 309, 310, 316, 316L, 317, 317L,321,347||SA-213 TP 304,304L, 309,310,316,316L, 317, 321,347|
|Ferritic Stainless||SA-268 TP 409, 430, 439||SA-268 TP 409, 430, 439, 410|
|Titanium||SB-338 2||SB-338 2|
|Alloy Duplex||SA-789-2101, 2102, 2205, 2507||SA-789-2101, 2102, 2205, 2207|