Payment & Shipping Terms:
|Tube Shape:||Stainless Steel U Bend Tube||Manufacturing:||Seamless Cold Drawn|
|Materials No.:||TP310S||OD:||1/2'' - 2''|
|WT:||0.035'' - 0.083''||Surface:||SOLUTION ANNEALED|
u bend tube,
stainless steel u bends
A213,SA213 TP310S Stianless Steel Cold Drawn U Bend Tube,Heat Exchanger Tube
310S stainless steel is a highly alloyed austenitic stainless steel, mainly used for elevated temperature applications mainly due to the advantage of their oxidation resistance. Due to its high chromium and nickel content, the general corrosion resistance of 310S is more superior to 304 or 309 in most environments. 310 stainless steel is mostly similar to grade 309, but offers greater corrosion resistance and oxidation at high temperatures.
Stainless steel 310S seamless pipes and 310S fittings are widely used for manufacturing furnace components, oil burner parts, heat exchangers and piping systems in chemical plants. In addition, 310S seamless tubes are widely used for general piping requirements across various industry verticals.
Standard Technical Range
We are equipped to carry out heat treatment of bends plus a minimum 150mm of leg.
Heat Treatment Equipment
Stainless Steel Tube Standards:
ASTM A249: Standard specification for welded austenitic steel boiler,superheater, heat-exchanger and condenser tubes.
ASTM A269:Standard specification for welded austenitic stainless steel tubing for general service.
ASTM A688:Standard specification for welded austenitic stainless steel feedwater heater tubes.
ASTM A554:Standard specification for welded stainless steel mechanical tubing.
ASTM A268:Specification for seamless and welded Ferritic/Martensitic stainless steel tubing for General Service
ASTM A789:Specification for seamless and welded Ferritic/Austenitic stainless steel tubing for General Service
ASTM A312:Seamless/Welded austenitic stainless steel pipe
DIN17455:General purpose welded circular stainless steel tubes
DIN17457: Welded circular austenitic stainless steel tubes subject to special requirements; technical delivery conditions
EN 10217-7:Welded Steel Tubes for pressure purposes-Part 7 Stainless steel tubes
|Typical Chemical Composition % (max values, unless noted)|
|0.08 max.||2.00 max.||1.50 max.||0.045 max.||0.03 max.||24.0 – 26.0||19.0 – 22.0||Balance|
|Melting Range,℃||1454 ℃|
|Elongation %||40 – 50|
|Tensile Strength (Mpa)||515|
|Yield Strngth (Mpa)||205|
|Materials - U-Bent Tube|
|Carbon Steel||SA 179 / A 179|
|Carbon Steel||SA 210 / A 210|
|Carbon Steel||SA 334 / A 334|
|Stainless Steel||SA 213 / A 213|
|SA249 / A249|
|SA268 / A268|
|SA688 / A688|
|Duplex Stainless Steel||SA 789 / A 789|
|Copper & Cu Alloys||SB 111 / B 111|
|Titanium & Ti Alloys||SB 338 / B 338|
|For different materials please contact our sales department.|