Payment & Shipping Terms:
|Materials:||TP316L Stainless Steel||Type:||Sample Hygienic Valves|
|Specifications:||3A ASME BPE||MOQ.:||1PC|
ss valves and fittings,
sanitary pipe fittings and valves
3A BPE TP316L Stainless Steel Hygienic Sampling Valves 1/2"-4"
Over 300 standard options of valves are available in Tri-clamp, NPT & Weld Body in Inline, 90 Degree and 45 Degree configurations. Complete cleaning is obtained inside of a stainless steel Laboratory washing chamber with detergent and rinse agent circulated in the chamber via rotating spray arms as well as through injectors directly inside of valves and dried via HEPA filtered air.
When choosing a Sampling Valve, different factors have to be considered:
Diaphragm: Silicone (for standard valve), EPDM (for valve with micro type connector)
Aseptic sampling valve is made from three parts: valve body, valve head and one piece of diaphragm. A rubber diaphragm valve is put at the axis of valve head, acting as an extensible valve core.
Quality & Inspection:
A Sampling Valve is a type of Valve used in process industries that allows taking a representative portion of a fluid(gases,liquids,fluidized,solids or slurries)to test (e.g. by physical measurements, chemical analysis, microbiological examination), typically for the purposes of identification, quality control, or regulatory assessment. It is a valve used for sampling.
The Sampling Valve allows the operator to extract a sample of the product from the production line or reactor and safely store it for transportation to the laboratory where it will be analysed or to the archive room where it can be retrieved for further use.
In chemical plants,a sample can be taken during the process to ensure that the output meets specifications (or that the quality is acceptable), before shipping the chemical good or before accepting the chemical product.
|General Specifications of Sanitary Sampling Valve|
|Max. Pressure||0~6 bar (600Kpa)|
|Continuous Working Temperature||-10°C ~ +121°C(EPDM)|
|Sterilization Temperature||150°C (Max 20min)|
|Internal Surface Finish||R0.8m|
|External Surface Finish||R1.6m|
|Connection Standards||DIN, SMS, 3A, ISO|
|Connection Methods||Welding, Clamp, Threading|
|Product Wetted||304 (1.4301) or 316L (1.4404)|
|Other Steel Parts||304 (1.4301)|
|EN 10204 3.1B certificate is available on request.|
|Options||FPM, Silicone, NBR|
|All seal materials comply with FDA 177.2600.|